L2 supply problem. The L2 supply is not moving properly. To try another card: 1. Open the laminator and remove the L2 cartridge. 2. Reposition, repair, or replace the supply and advance the repaired a...

Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.

Printer problem. The printer had an error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power on the printer.

L2 supply out or missing. The laminator does not have usable supplies. 1. Open the laminator. 2. Replace the supply. 3. Close the laminator.

Card hopper empty. The printer did not detect cards in the input hopper. Add cards to the input hopper.

Magstripe read no data. The printer did not find any magnetic stripe data on the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer settings....

Fix ribbon not moving with our quick troubleshooting guide. Resolve the issue and restart printing now.

Card not in position. The card is not positioned in the printer correctly. 1. Open the printer and remove the ribbon cartridge. 2. Turn the knob to remove the card. 3. Replace the ribbon cartridge and...

Print ribbon out or missing? Follow three simple steps to install a new ribbon and cleaning roller. Resume printing cards now.

Card not picked? Open the input hopper, reposition cards or push card in until picked, then close and resume. Fix it now.