IIDaaS ribbon in IFI printer. The IIDaaS print ribbon installed is not intended for use in this printer model. Replace the print ribbon with an IFI compatible ribbon type. Press the User button to con...
Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...
Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: 1. Set up the external card reader to receive the card. 2. Perform error...
Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...
Insert same card side 2 up. 1. Take the card from the printer. 2. Turn the card over end to end so side 2 is facing up. 3. Insert the card in the printer. 4. If the card is not immediately picked, pre...
Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.
Close cover to continue. The cover is open or the print ribbon cartridge is missing. Confirm that the print ribbon cartridge is installed and then close the cover.
