Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...

L2 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L2 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...

Insert cleaning card. 1. Insert cleaning card. 2. If the card is not immediately picked, press the printers User button or click OK.

L1 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L1 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...

Insert cleaning card. Insert cleaning card.If the card is not immediately picked, press the printers User button or click OK.

Laminator exit card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator.

Printer problem. The printer had an error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power on the printer.

L1 supply problem. The L1 supply is not moving properly. To try another card: 1. Open the laminator and remove the L1 cartridge. 2. Reposition, repair, or replace the supply and advance the repaired a...

L1 supply out or missing. The laminator does not have usable supplies. 1. Open the laminator. 2. Replace the supply. 3. Close the laminator.

Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...