Embosser card exit jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges. 4. Close and lock the emb...

Impresser supply error. The impresser cannot use the installed impresser foil. Power off and restart the printer.If the error occurs again, replace the impresser cassette.In the Card Printer Driver me...

Impresser supply out. The impresser foil is out of material. Install a new supply cartridge.

Impresser supply out. The impresser foil is out of material. Install a new supply cartridge.

Impresser supply error. The impresser cannot use the installed impresser foil. Power off and restart the printer.If the error occurs again, replace the impresser cassette.In the Card Printer Driver me...

Magstripe read data error. The printer failed to read the magnetic stripe data from the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer se...

Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.

Card hopper empty. The printer did not detect cards in the input hopper. Add cards to the input hopper.

Magstripe data error. The printer failed to verify that the correct magnetic stripe data was written on the card. Make sure that you are using magnetic stripe cards that match the printer settings.Mak...

Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...