Laminator entry card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator.

L2 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L2 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...

Insert cleaning card. 1. Insert cleaning card. 2. If the card is not immediately picked, press the printers User button or click OK.

Insert cleaning card. Insert cleaning card.If the card is not immediately picked, press the printers User button or click OK.

L1 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L1 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...

Topping foil out. The embosser does not have usable topping foil. 1. Open the embosser and remove the topping foil cartridge. 2. Install new topping foil. 3. Replace the cartridge, and then close and ...

Topping foil type problem. The embosser cannot use the topping foil installed. The card will be canceled. Use supplies designed for this printer.

Laminator exit card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator.

L1 supply out or missing. The laminator does not have usable supplies. 1. Open the laminator. 2. Replace the supply. 3. Close the laminator.

Indent ribbon supplies out. The embosser does not have usable indent ribbon. 1. Open the embosser and remove the indent ribbon cartridge. 2. Install a new indent ribbon. 3. Replace the cartridge, and ...