Card not in position. The card is not positioned in the printer correctly. 1. Open the printer and remove the ribbon cartridge. 2. Turn the knob to remove the card. 3. Replace the ribbon cartridge and...
Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.
Card not in position. The card is not positioned in the printer correctly. Open the printer and remove the ribbon cartridge.Turn the knob to remove the card.Replace the ribbon cartridge and close the ...
Laminator exit card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator.
Insert same card side 2 up. 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...
Insert same card side 2 up. 1. Take the card from the printer. 2. Turn the card over end to end so side 2 is facing up. 3. Insert the card in the printer. 4. If the card is not immediately picked, pre...
Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.
Close cover to continue. The cover is open or the print ribbon cartridge is missing. Confirm that the print ribbon cartridge is installed and then close the cover.
L2 supply problem. The L2 supply is not moving properly. To try another card: 1. Open the laminator and remove the L2 cartridge. 2. Reposition, repair, or replace the supply and advance the repaired a...
