Embosser card reject full. The embosser reject tray is full. 1. Open the embosser and empty the reject tray. 2. Close and lock the embosser.

Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...

Topping foil type problem. The embosser cannot use the topping foil installed. The card will be canceled. Use supplies designed for this printer.

Topping foil problem. The embosser topping foil is not moving properly. The card will be canceled. 1. Open the embosser and remove the topping foil cartridge. 2. Reposition, repair, or replace the top...

L1 supply out or missing. The laminator does not have usable supplies. 1. Open the laminator. 2. Replace the supply. 3. Close the laminator.

Embosser topper jam. The embosser topping foil is not moving properly. 1. Open the embosser and remove the topping foil cartridge. 2. Reposition, repair, or replace the topping foil. 3. Replace the ca...

Topping foil out. The embosser does not have usable topping foil. 1. Open the embosser and remove the topping foil cartridge. 2. Install new topping foil. 3. Replace the cartridge, and then close and ...

Topping foil type problem. The embosser cannot use the topping foil installed. The card will be canceled. Use supplies designed for this printer.

Indent ribbon supplies out. The embosser does not have usable indent ribbon. 1. Open the embosser and remove the indent ribbon cartridge. 2. Install a new indent ribbon. 3. Replace the cartridge, and ...

Laminator entry card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator.