Indent ribbon low. The indent ribbon has almost reached the end of the roll. Replace the indent ribbon soon.

Embosser card reject full. The embosser reject tray is full. 1. Open the embosser and empty the reject tray. 2. Close and lock the embosser.

Embosser card stack full. The embosser output hopper is full or blocked. Remove cards from the printer output hopper.

Embosser card exit jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges. 4. Close and lock the emb...

Embosser card entry jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges, and then close and lock ...

Embosser topper jam. The embosser topping foil is not moving properly. 1. Open the embosser and remove the topping foil cartridge. 2. Reposition, repair, or replace the topping foil. 3. Replace the ca...

Embosser card jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges, and then close and lock the em...

Emboss transport error. The card is not correctly positioned in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges, close and loc...

Emboss format error. The emboss data sent does not match the format set in the embosser. The card will be canceled.

Run an Alcohol Cleaning Card How-to Video for the Artista CR Printer Series