Critical problem. The printer had a serious error. The card will be canceled. Press the printer Power button to power off the printer.Request service. The system must remain powered off.

Printer problem. The printer had an error. The card will be canceled. Press the printer Power button to power off the printer.Press the Power button again to power on the printer.

Card not in position. The card is not positioned in the printer correctly. Open the printer and remove the ribbon cartridge.Turn the knob to remove the card.Replace the ribbon cartridge and close the ...

Job could not complete. The card took too much time to complete. The card will be canceled.

Request not supported. The printer does not support the personalization being requested for the card. The card will be canceled. Change the card data to match the printers options and settings, or pri...

Card hopper empty. The printer did not detect cards in the input hopper. Add cards to the input hopper.

Understand the functions of the EM1 and EM2 front panel

Embosser indent error. The embosser indent ribbon is not moving properly. Open the embosser and remove the indent ribbon cartridge.Reposition, repair, or replace the ribbon and advance the repaired ar...

Printer LCD message: Lost card, open emboss cover Driver message: Card not in position in embosser. The card is not correctly positioned in the embosser. 1. Open the embosser and remove the supply car...

Embosser not available. The printer and embosser cannot communicate. The card will be canceled. 1. Make sure the data cable from the embosser to the printer is securely plugged in. 2. Press the printe...