L2 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L2 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...

L1 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L1 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...

Laminator entry card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator. 4. In the Card Printer Driver mes...

Laminator exit card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator. 4. In the Card Printer Driver mess...

L1 supply type problem. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.

L2 supply out or missing. The laminator does not have usable supplies. 1. Open the laminator. 2. Replace the supply. 3. Close the laminator. 4. In the Card Printer Driver message, click OK, or click C...

Debow problem. The laminator has encountered an error in the debow area. 1. Remove the card. 2. Press the printer POWER button to power off the system. 3. Press the printer POWER button again to power...

Laminator not available. The printer and laminator cannot communicate. The card will be canceled. 1. Make sure the data cable from the laminator to the printer is securely plugged in. 2. Press the pri...

Topping foil type problem. The embosser cannot use the topping foil installed. The card will be canceled. Use supplies designed for this printer.

Remove print ribbon. Remove the print ribbon. 1. Open the printer and remove the ribbon cartridge. 2. Close the printer. 3. Press the user button to continue.