C2 supply type error. The C1 ink ribbon and C2 retransfer film are not compatible. Replace one or both with known compatible supplies.

Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or click OK.

C2 supply error. The C2 retransfer film has encountered an error. Open the printer access door and remove the C2 retransfer film cartridge.Reposition, repair, or replace the supply and advance the repaired area one full turn.Replace the C2 retransfer film cartridge.Close the printer access door.

Insert cleaning card. 1. Insert cleaning card. 2. If the card is not immediately picked, press the printers User button or click OK.

Card still in printer. RESERVED

C2 heated roller motion error. The C2 retransfer heated roller has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the system. 2. Request service. The system must remain powered off.

L2 supply out or missing. The laminator does not have usable supplies. 1. Open the laminator. 2. Replace the supply. 3. Close the laminator.

Impresser card jam. The card is not in position in the impresser. 1. Open the impresser door. 2. Remove the supply cartridge. 3. Push the card through the card track and out the impresser back exit slot.

Laser setup error. There is a problem in the laser setup. The card will be canceled. Make sure that the laser setup is correct.

Impresser sensor problem. The laminator has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the system. 2. Request service. The system must remain powered off.