RIM lost card. The card cannot be located in the Rear Indent Module. Power off and unplug the printer and RIM.Remove the RIM supply and the RIM from the printer.Rotate the drive gear to move the card out.Reconnect the RIM and printer, and reinstall the RIM supply.Plug in the power cords and restart the printer.
RIM card jam. The card is not in position in the Rear Indent Module. Power off and unplug the printer and RIM.Remove the RIM supply and the RIM from the printer.Rotate the drive gear to move the card out.Reconnect the RIM and printer, and reinstall the RIM supply.Plug in the power cords and restart the printer.
Insert same card side 2 up. 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or click OK.
Magstripe read no data. The printer did not find any magnetic stripe data on the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer settings. 2. Make sure that the cards are placed in the printer correctly.
Insert cleaning card. 1. Insert cleaning card into exception slot of multi-hopper. 2. If the card is not immediately picked, press the printer's user button or click OK.
UV ribbon requires LCM. The inserted UV ribbon requires an attached Light Cure Module (LCM) for curing. To resolve the issue: 1. Power off the printer. 2. Attach a rear Light Curing Module. 3. Power on the printer.. Alternatively, replace the UV ribbon with a standard ribbon.
RIM Supply Error. A RIM supply problem has occurred or the cassette is out of ribbon. Remove supply cassette and address any issues with the supply or install a new supply cassette.
Close cover to continue. The cover is open or the print ribbon cartridge is missing. Confirm that the print ribbon cartridge is installed and then close the cover.
Laminator exit card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator. 4. In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.