Insert new card side 1 up. Insert a new card in the printer with side 1 facing up.If the card is not immediately picked, press the printers User button or click OK.

C2 supply error. The C2 retransfer film has encountered an error. 1. Open the printer access door and remove the C2 retransfer film cartridge. 2. Reposition, repair, or replace the supply and advance the repaired area one full turn. 3. Replace the C2 retransfer film cartridge. 4. Close the printer access door.

Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or click OK.

Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or click OK.

Insert new card side 2 up. Turn a new card over end to end so side 2 is facing up.Insert the card in the printer.If the card is not immediately picked, press the printers User button or click OK.

Input Hopper Jam at exit. A card remained at the multi-hopper exit and did not reach the print unit. OR After a card jam, the card was cleared by pushing it out of the multi-hopper to be deposited in the reject card area. The card was not placed in the reject card area. Remove the card.

Card still in printer. RESERVED

Insert new card side 2 up. 1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or click OK.

L1 supply not identified. The laminator cannot use the supply installed. Use supplies designed for this laminator.

Failed to lock. An attempt to lock the printer failed. The card will be canceled. 1. Make sure that all access doors are closed securely. 2. Try locking the printer again.