Option not installed. The printer does not support the personalization being requested for the card. The card will be canceled. Change the card data to match the printers options and settings, or print to a printer that is configured to support the personalization being requested.

Print ribbon not supported. The printer cannot use the ribbon installed. The card will be canceled.

Print ribbon not supported. The printer cannot use the ribbon installed. The card will be canceled.

Insert new card side 2 up. 1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or click OK.

Insert new card side 1 up. Insert a new card in the printer with side 1 facing up.If the card is not immediately picked, press the printers User button or click OK.

Impresser drive error. The impresser die motor has an error. 1. Open the impresser door. 2. Make sure that the card or foil is not stuck to the die. 3. Cancel the job. 4. If the issue continues to occur, request service. 4. Press the USER button on the printer to clear the

Impresser error. An unexpected error has occurred in the impresser. Power off and restart the printer.If the error occurs again, request service.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.

Embosser card stack full. The embosser output hopper is full or blocked. Remove cards from the printer output hopper.

L2 supply problem. 1. Open the laminator and remove the L2 cartridge. 2. Reposition, repair, or replace the supply and advance the repaired area one full turn. 3. Replace the cartridge and close the laminator. 4. In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.

TIM supply write error. The impresser supply information was not updated properly. Power off and restart the printer.If the error occurs again, replace the impresser cassette.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.