C1 supply not identified. The printer cannot use the C1 ink ribbon installed. Use a supply designed for this printer.

Print ribbon not supported. The printer cannot use the ribbon installed. The card will be canceled.

Magstripe format problem. The magnetic stripe data sent does not match the format set in the printer. The card will be canceled.

Cover opened during job. The printer cover was opened while printing. Close the printer cover completely.

Insert same card side 2 up. 1. Take the card from the printer. 2. Turn the card over end to end so side 2 is facing up. 3. Insert the card in the printer. 4. If the card is not immediately picked, press the printers User button or click OK.

Print ribbon type problem. The printer cannot use the ribbon installed. The card will be canceled. Use ribbon designed for this printer.

Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.

Print ribbon not supported. The printer cannot use the ribbon installed. The card will be canceled.

Cover opened during job. The printer cover was opened while printing. Close the printer cover completely.

Topping foil problem. The embosser topping foil is not moving properly. The card will be canceled. 1. Open the embosser and remove the topping foil cartridge. 2. Reposition, repair, or replace the topping foil and advance the repaired area one full turn. 3. Replace the cartridge, and then close and lock the embosser.