Hardware Knowledge Base

Start your search by choosing your product and article type:

Technotes
Bulletins
Discontinuation Notices
Error Codes

Sigma - Printer Components Front and Right Side

How-to Video

Front and Right Side of the Printer

User-added image
Input HopperThe input hopper holds cards for printing. The hopper holds up to 125 cards (0.030 in. or 0.762 mm thickness).
The hopper cartridge can be removed from the printer for secure storage.
Cartridge Release ButtonsThe cartridge release buttons allow you to remove the input hopper cartridge from the printer. Push in the buttons, squeeze the cartridge, and pull it out from the printer.
Exception SlotUse the exception slot to insert a single card type than those loaded in the input hopper.
Rear Module Data Connection PortThe electrical connection for a another tactile impression module to connect to the system. This option is not
supported at this time.
Front PanelUse the front panel to work with the printer. The LCD panel displays printer messages and status information. The buttons allow you to power the printer on and off, and navigate the printer menu system.
Output HopperThe output hopper holds up to 25 completed cards.
LED Light BarThe LED light bar blinks to indicate a printer error status. It is a solid color when the printer is in Ready status.
Input Hopper LockThe input hopper lock unlocks the input hopper. The lock is present only in the DS3 printer models.
Reject TrayUnfinished cards or cards not processed properly are placed in the reject tray for printers with locks. Printers without locks place unfinished cards in the output hopper.
Printer LockThe printer lock unlocks the printer cover and reject tray. The lock is present only in the DS3 printer models.
*
Chat Now