Hardware Knowledge Base

Start your search by choosing your product and article type:

Technotes
Bulletins
Discontinuation Notices
Error Codes

Sigma - Clean the Printhead

Do the following to clean the printhead:
  1. Power off the printer.
  2. Unlock the printer and open the printer cover.
  3. Open and remove a cleaning swab from its package.
  4. Lift the printhead protective cover. Use the sides of the cover to rotate it away from the printhead.
  5. Use gentle pressure to move the cleaning swab back and forth along the full length of the printhead edge until it is completely clean.
  6. Close the printer cover. Press down on the ridges on the front of the cover to make sure that it latches completely on both sides.
  7. Power on the printer.
  8. Print a sample card to verify the quality of printing. 
User-added image
HINTS & TIPS
  • Avoid touching the printhead edge with your fingers. Contamination due to skin oils eventually can damage the printhead.
  • Avoid touching the printing edge of the printhead cartridge with any sharp objects that can permanently damage the printhead.
  • Use only the cleaning swab to clean the printhead. Other materials can stick to the printhead and cause damage.
  • Use a cleaning swab one time only. Discard it after you clean the printhead.
*