Error Code 174 - Sigma DS1, DS2, DS3, DS4

Summary

Card is still in the printer module during an embosser condition.

Error Message no. 174
Message text Card still in printer
Recovery Text The card cannot be located in the impresser.
  1. Power off and unplug the printer and impresser.
  2. Open the impresser and remove the supply cassette.
  3. Remove the impresser from the printer.
  4. Rotate the drive gear to move the card out of the impresser.
  5. Reconnect the impresser and printer, and reinstall the supply cassette.
  6. Plug in the power cords and restart the printer.
  7. In the Card Printer Driver or Dashboard message, click Retry, or click Cancel to cancel the card.