Embosser card jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges, and then close and lock the embosser.

Embosser card exit jam. The card path is blocked in the embosser. 1. Open the embosser and remove the supply cartridges. 2. Remove any cards found. 3. Replace the cartridges. 4. Close and lock the embosser.

Print ribbon not identified. The printer cannot use the ribbon installed. The card will be canceled. Use ribbon designed for this printer.

Magstripe not available. The printer does not have a magnetic stripe option. The card will be canceled. Remove magnetic stripe data from the card or use a printer that has a magnetic stripe option installed.

Emboss cover error. The embosser, printer, or multi-card hopper is open. Make sure that all access doors are closed securely and locked.

Print while unlocked. The printer is unlocked. The card will be canceled. Make sure that all access doors are closed securely and locked.

Wait for print temperature. This message does not display. The LCD displays the quot;Warming up xx%quot; message. The printer is waiting for the printhead heater to reach operating temperature.

Print ribbon not supported. The printer cannot use the ribbon installed. The card will be canceled.

Laminator entry card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator.

Input Hopper Jam exception. A card is in the exception slide during a hopper reset. Remove the card from the exception slide. This may or may not require the security enclosure door to be opened.