Card hopper empty. The printer did not detect cards in the input hopper. Add cards to the input hopper.

Printer problem. The printer had an error. The card will be canceled. Press the printer Power button to power off the printer.Press the Power button again to power on the printer.

Card hopper empty. The printer did not detect cards in the input hopper. Add cards to the input hopper.

Magstripe data error. The printer failed to verify that the correct magnetic stripe data was written on the card. Make sure that you are using magnetic stripe cards that match the printer settings.Make sure that the cards are placed in the printer correctly.

Print ribbon out or missing. The printer does not have usable ribbon. To complete the current card: 1. Open the printer and remove the ribbon cartridge. 2. Install a new ribbon and cleaning roller. 3. Replace the cartridge and close the printer.

Configuration error. The configuration is not compatible with the printer model. The printer cannot print cards until the configuration issue is corrected. Contact your service provider for assistance.

Cloud connection error (Note: This functionality will not be available until D3.17.3). The connection to the cloud server failed.

L2 heater sensor problem. The laminator has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system.Request service. The system must remain powered off.

Laser setup name length error. The laser card setup name or element name is too long. Shorten the name as needed.

Impresser supply error. Need to select one of the following descriptions: Power down and restart the printer.If the error occurs again, replace the impresser cartridge.