Summary
Card not received
| Error Message no. | 179 |
| Message text | Card not received |
| Severity | Error |
| Recovery Text | The card was not moved out of the external card reader. Remove the card from the external card reader. |
Summary
Insert cleaning card
| Error Message no. | 172 |
| Message text | Insert cleaning card |
| Severity | Warning |
| Recovery Text | 1. Insert cleaning card. 2. If the card is not immediately picked, press the printer's User button or click OK. |
Summary
Insert cleaning card
Summary
Input Hopper Jam print input
| Error Message no. | 187 |
| Message text | Input Hopper Jam print input |
| Recovery Text | The card still did not reach the print unit after an attempt to move it into the print unit. Remove the card. |
Summary
Insert new card side 1 up
Summary
Laminator exit card problem
Summary
Ink ribbon problem
| Error Message no. | 164 |
| Message text | Ink ribbon problem |
| Severity | Error |
| Recovery Text | The ink ribbon is broken or not usable. Refer to the printer's User's Guide for information about repairing the ink ribbon. Press the User button to clear the message. |
Summary
Improper shutdown
| Error Message no. | 173 |
| Message text | Improper shutdown |
| Severity | Critical |
| Recovery Text | The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer. Click OK on the PC to clear the message. |
Summary
Card blocking exit sensors
Summary
Set print unit to download
| Error Message no. | 160 |
| Message text | Set print unit to download |
| Severity | Error |
| Recovery Text | The printer firmware is being updated. Refer to the Print Unit Front Panel section in the printer's User's Guide for information about how to set the printer to accept the firmware. |
