| Entrust

Error Code 170 - CD800, CD800 CLM, CD820

Summary

Insert new card side 1 up

Summary

Card blocking exit sensors

Summary

L2 area card problem

Summary

Insert new card side 2 up

Error Message no.	152
Message text	Insert new card side 2 up
Severity	Warning
Recovery Text	1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printer's User button or click OK.

Summary

Insert same card side 1 up

Error Message no.	171
Message text	Insert same card side 1 up
Severity	Warning
Recovery Text	1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printer's User button or click OK.

Summary

Card still in printer

Summary

Failed to lock

Error Message no.	151
Message text	Failed to lock
Severity	Critical
Recovery Text	An attempt to lock the printer failed. The card will be canceled. 1. Make sure that all access doors are closed securely. 2. Try locking the printer again.

Summary

Critical error condition with Laminator

Summary

Input Hopper Jam two cards

Error Message no.	193
Message text	Input Hopper Jam two cards
Recovery Text	Two cards were in the card track. After a card jam, an attempt was made to push the card out of the multi-hopper to be deposited in the reject card area. The card at the print unit entrance causes the reject to fail. Remove the cards.

Summary

C2 supply out or missing