IIDaaS ribbon in IFI printer. The IIDaaS print ribbon installed is not intended for use in this printer model. Replace the print ribbon with an IFI compatible ribbon type. Press the User button to con...
Insert cleaning card. 1. Insert cleaning card into exception slot of multi-hopper. 2. If the card is not immediately picked, press the printer's user button or click OK.
LCM card jam. The card is not in position in the LCM. 1. Open the LCM door. 2. Rotate the transport knob counter-clockwise at least 6 turns to move the card out the rear of the LCM. 3. Close the LCM d...
LCM lost card. The card cannot be located in the LCM. 1. Open the LCM door. 2. Rotate the transport knob counter-clockwise at least 6 turns to move the card out the rear of the LCM. 3. Close the LCM d...
UV ribbon requires LCM. The inserted UV ribbon requires an attached Light Cure Module (LCM) for curing. To resolve the issue: 1. Power off the printer. 2. Attach a rear Light Curing Module. 3. Power o...
Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...
Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: 1. Set up the external card reader to receive the card. 2. Perform error...
Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...
