Impresser supply error. The impresser cannot use the installed impresser foil. Power off and restart the printer.If the error occurs again, replace the impresser cassette.In the Card Printer Driver me...
Magstripe read data error. The printer failed to read the magnetic stripe data from the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer se...
Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.
Magstripe data error. The printer failed to verify that the correct magnetic stripe data was written on the card. Make sure that you are using magnetic stripe cards that match the printer settings.Mak...
Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...
Insert same card side 2 up. 1. Take the card from the printer. 2. Turn the card over end to end so side 2 is facing up. 3. Insert the card in the printer. 4. If the card is not immediately picked, pre...
Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.
Insert new card side 2 up. 1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printers User button or cli...
Card not picked. The printer did not pick a card. To complete the current card: For printers with an input hopper, Open the input hopper.Add or reposition cards.Close the hopper. For printers with sin...
