Laminator exit card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator. 4. In the Card Printer Driver mess...

L2 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L2 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...

L1 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L1 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...

Laminator entry card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator. 4. In the Card Printer Driver mes...

Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: 1. Set up the external card reader to receive the card. 2. Perform error...

Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: Set up the external card reader to receive the card.Perform error recove...

C2 supply type error. The C1 ink ribbon and C2 retransfer film are not compatible. Replace one or both with known compatible supplies.

Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...

Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...

Insert cleaning card. 1. Insert cleaning card. 2. If the card is not immediately picked, press the printers User button or click OK.