C2 heater error. The C2 retransfer heater has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system. The system must remain powered off.Reques...

C2 heat sensor error. The C2 retransfer heat sensor has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system.Request service. The system must...

C1 printhead error. The printer has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system. The system must remain powered off.Request service.

C2 waiting for roller temp. This message does not display. The LCD displays the quot;Warming up xx%quot; message. The printer is waiting for the retransfer heated roller to reach its operating tempera...

Waiting for laminator temp. This message does not display. The LCD displays the quot;Warming up xx%quot; message. The printer is waiting for the laminator heaters to reach operating temperature.

Supply region not valid. The printer cannot use the supply installed. The card will be canceled. Use a supply with the correct code for your region.

Card not received. The card was not moved out of the external card reader. Remove the card from the external card reader.

Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: Set up the external card reader to receive the card.Perform error recove...

C2 supply type error. The C1 ink ribbon and C2 retransfer film are not compatible. Replace one or both with known compatible supplies.

C2 supply error. The C2 retransfer film has encountered an error. Open the printer access door and remove the C2 retransfer film cartridge.Reposition, repair, or replace the supply and advance the rep...