Embosser indent error. The embosser indent ribbon is not moving properly. 1. Open the embosser and remove the indent ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repa...
Topping foil no tag found. The embosser cannot use the topping foil installed. 1. Open the embosser and remove the topping foil cartridge. 2. Install new topping foil. 3. Replace the cartridge, and th...
Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...
Print ribbon problem. The print ribbon is not moving properly. 1. Open the printer and remove the ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repaired area one full ...
Critical problem. The printer had a serious error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Request service. The system must remain powered off.
Card not picked. The printer did not pick a card. To complete the current card: For printers with an input hopper Open the input hopper.Add or reposition cards. Close the hopper. For printers with sin...
Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: 1. Set up the external card reader to receive the card. 2. Perform error...
Flipper module rotate error. The flipper did not reach the required position. 1. Open the printer access door. 2. Press the K3 rear access door release to open the rear access door. 3. Reach in and ro...