Magstripe read no data. The printer did not find any magnetic stripe data on the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer settings....
Insert same card side 2 up. 1. Take the card from the printer and turn it over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...
Magstripe data not found. The printer did not find magnetic stripe data on card. Make sure that you are using magnetic stripe cards that match the printer settings.Make sure that the cards are placed ...
Magstripe data error. The printer failed to verify that the correct magnetic stripe data was written on the card. Make sure that you are using magnetic stripe cards that match the printer settings.Mak...
Insert same card side 2 up. 1. Take the card from the printer. 2. Turn the card over end to end so side 2 is facing up. 3. Insert the card in the printer. 4. If the card is not immediately picked, pre...
Insert new card side 1 up. 1. Insert a new card in the printer with side 1 facing up. 2. If the card is not immediately picked, press the printers User button or click OK.
Multi-hopper pick error. The multi-hopper did not pick a card from the input hopper cartridge. 1. Unlock the multi-hopper if locks are installed. 2. Remove each cartridge and make sure that cards are ...
L1 supply not identified. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.