Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...
Multi-hopper pick error. The multi-hopper did not pick a card from the input hopper cartridge. 1. Unlock the multi-hopper if locks are installed. 2. Remove each cartridge and make sure that cards are ...
Impresser door open. The impresser door is open. Close the door to continue. Press the USER button on the printer to clear the message.In the Card Printer Driver message, click Retry, or click Cancel ...
Impresser door open. The impresser door is open. Close the door to continue. Press the USER button on the printer to clear the message.In the Card Printer Driver message, click Retry, or click Cancel ...
Impresser card jam. The card is not in position in the impresser. 1. Power off and unplug the printer and impresser. 2. Open the impresser and remove the supply cassette. 3. Remove the impresser from ...
Impress foil not supported. The impresser cannot use the installed foil. Use a supply designed for this impresser. Press the USER button on the printer to clear the message.In the Card Printer Driver ...
Impresser error. An unexpected error has occurred in the impresser. Power off and restart the printer.If the error occurs again, request service.In the Card Printer Driver message, click Retry, or cli...
Impresser not detected. The printer cannot communicate with the impresser. Power off and restart the printer.If the error occurs again: Power off and unplug the printer and impresser.Open the impresse...
TIM supply write error. The impresser supply information was not updated properly. Power off and restart the printer.If the error occurs again, replace the impresser cassette.In the Card Printer Drive...
Impresser drive error. The impresser die motor has an error. 1. Open the impresser door. 2. Make sure that the card or foil is not stuck to the die. 3. Cancel the job. 4. If the issue continues to occ...
