| Entrust

Error Code 103 - Sigma DS1, DS2, DS3, DS4

Summary

Printer problem

Summary

Print ribbon problem

Summary

Cover opened during job

Error Message no.	114
Message text	Cover opened during job
Severity	Critical or Error
Recovery Text	The printer cover was opened while printing. Close the printer cover completely.

Summary

Printer problem

Summary

Card not picked

Error Message no.	111
Message text	Card not picked
Severity	Warning
Recovery Text	The printer did not pick a card. To complete the current card: For printers with an input hopper, open the input hopper, add or reposition cards, and close the hopper. For printers with single card feed, push the card in until the printer picks it.

Summary

Job could not complete

Error Message no.	101
Message text	Job could not complete
Severity	Critical
Recovery Text	The card took too much time to complete. The card will be canceled.

Summary

Print ribbon problem

Error Message no.	109
Message text	Print ribbon problem
Severity	Error
Recovery Text	The print ribbon is not moving properly. 1. Open the printer and remove the ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repaired area one full turn. 3. Replace the ribbon cartridge and close the printer.

Summary

Print ribbon out or missing

Summary

Cover opened during job

Error Message no.	114
Message text	Cover opened during job
Severity	Critical or Error
Recovery Text	The printer cover was opened while printing. Close the printer cover completely.

Summary

Critical problem

Error Message no.	104
Message text	Critical problem
Severity	Critical
Recovery Text	The printer had a serious error. The card will be canceled. Press the printer Power button to power off the printer. The system must remain powered off. Request service.