Firmware version mismatch. The printer and laminator firmware versions are not compatible. The system cannot laminate cards until the firmware has been updated. Update both the printer and laminator t...

Laminator system mismatch. The printer and laminator are not compatible. The laminator is not supported by your printer model. Contact your service provider for the correct laminator model.

L1 supply not identified. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.

Laminator error critical. The laminator has encountered a critical error. The card will be canceled. 1. Press the printer POWER button to power off the system. 2. Request service. The system must rema...

L2 supply not supported. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.

Input Hopper Jam two cards. Two cards were in the card track. After a card jam, an attempt was made to push the card out of the multi-hopper to be deposited in the reject card area. The card at the pr...

Input Hopper Jam two cards. A card was picked but did not reach the print unit. A second card was picked, causing two cards to be in the card track. Remove both cards.

Input Hopper Jam card lost. The card did not arrive at the hopper exit. Either the card was not picked, or it was dropped. Remove the card.

Input Hopper Jam print input. A card is at the entrance of the print unit during a hopper reset. Remove the card.

Input Hopper Jam print input. The card still did not reach the print unit after an attempt to move it into the print unit. Remove the card.