TIM supply write error. The impresser supply information was not updated properly. Power off and restart the printer.If the error occurs again, replace the impresser cassette.In the Card Printer Drive...
RT1 reject tray full. The reject tray is full. Open the printer access door.Remove the retransfer film cartridge.Remove the rejected cards.Replace the retransfer film cartridge.Close the printer acces...
IIDaaS ribbon in IFI printer. The IIDaaS print ribbon installed is not intended for use in this printer model. Replace the print ribbon with an IFI compatible ribbon type. Press the User button to con...
Insert cleaning card in H2. 1. Unlock the multi-hopper if locks are installed. 2. Remove unused cards and insert the cleaning card in hopper 2. 3. Close and lock (if installed) the multi-hopper. 4. Pr...
Multi-hopper pick error. The multi-hopper did not pick a card from the input hopper cartridge. 1. Unlock the multi-hopper if locks are installed. 2. Remove each cartridge and make sure that cards are ...
Multi-hopper card jam. The multi-hopper did not move a card into the printer. Press the User button to clear the error. If a card was jammed, it is moved to the reject tray.
L2 supply not identified. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.
L2 supply not supported. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.
L2 supply type problem. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.
