Magstripe data error. The printer failed to verify that the correct magnetic stripe data was written on the card. Make sure that you are using magnetic stripe cards that match the printer settings.Mak...

Magstripe read no data. The printer did not find any magnetic stripe data on the card. The card will be canceled. Make sure that you are using magnetic stripe cards that match the printer settings.Mak...

Magstripe read no data. The printer did not find any magnetic stripe data on the card. The card will be canceled. Make sure that you are using magnetic stripe cards that match the printer settings.Mak...

Print ribbon problem. The print ribbon is not moving properly. Open the printer and remove the ribbon cartridge.Reposition, repair, or replace the ribbon and advance the repaired area one full turn.Re...

Flipper module rotate error. The flipper did not reach the required position. 1. Open the printer access door. 2. Press the K3 rear access door release to open the rear access door. 3. Reach in and ro...

C1 supply type error. The C1 ink ribbon does not support an action requested by this print job. Use a supply designed for this printer model.

C1 printhead error. The printer has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system.Request service. The system must remain powered off.

Waiting for laminator temp. This message does not display. The LCD displays the quot;Warming up xx%quot; message. The printer is waiting for the laminator heaters to reach operating temperature.

Print while unlocked. The printer is unlocked. The card will be canceled. Make sure that all access doors are closed securely and locked.

Insert new card side 1 up. Insert a new card in the printer with side 1 facing up.If the card is not immediately picked, press the printers User button or click OK.