Waiting for laminator temp. This message does not display. The LCD displays the quot;Warming up xx%quot; message. The printer is waiting for the laminator heaters to reach operating temperature.

Emboss cover error. The embosser, printer, or multi-card hopper is open. Make sure that all access doors are closed securely and locked.

L2 heater roller problem. The laminator has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system.Request service. The system must remain powe...

Debow problem. The laminator has encountered an error in the debow area. Remove the card.Press the printer Power button to power off the system.Press the printer Power button again to power on the sys...

L2 heater sensor problem. The laminator has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system.Request service. The system must remain powe...

Magstripe data not found. The printer did not find magnetic stripe data on card. 1. Make sure that you are using magnetic stripe cards that match the printer settings. 2. Make sure that the cards are ...

Multi-hopper error. The multi-hopper has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power o...

Multi-hopper card jam. The multi-hopper did not move a card into the printer. Press the User button to clear the error. If a card was jammed, it is moved to the reject tray.

L1 supply not identified. The laminator cannot use the supply installed. Use supplies designed for this laminator.

Supply region not valid. The printer cannot use the supply installed. The card will be canceled. Use a supply with the correct code for your region.