Multi-hopper pick error. The multi-hopper did not pick a card from the input hopper cartridge. 1. Unlock the multi-hopper if locks are installed. 2. Remove each cartridge and make sure that cards are ...

Multi-hopper card jam. The multi-hopper did not move a card into the printer. Press the User button to clear the error. If a card was jammed, it is moved to the reject tray.

L2 supply not identified. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.

L2 supply not supported. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.

L2 supply type problem. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.

L2 supply out or missing. The laminator does not have usable supplies. 1. Open the laminator. 2. Replace the supply. 3. Close the laminator. 4. In the Card Printer Driver message, click OK, or click C...

L2 supply problem. 1. Open the laminator and remove the L2 cartridge. 2. Reposition, repair, or replace the supply and advance the repaired area one full turn. 3. Replace the cartridge and close the l...

L1 supply type problem. The laminator cannot use the supply installed. Use supplies designed for this laminator.In the Card Printer Driver message, click Retry, or click Cancel to cancel the card.

L1 supply out or missing. The laminator does not have usable supplies. 1. Open the laminator. 2. Replace the supply. 3. Close the laminator. 4. In the Card Printer Driver message, click OK, or click C...

L1 supply problem. The L1 supply is not moving properly. To try another card: 1. Open the laminator and remove the L1 cartridge. 2. Reposition, repair, or replace the supply and advance the repaired a...