Flipper module rotate error. The flipper did not reach the required position. 1. Open the printer access door. 2. Press the K3 rear access door release to open the rear access door. 3. Reach in and ro...

C1 supply type error. The C1 ink ribbon does not support an action requested by this print job. Use a supply designed for this printer model.

C1 printhead error. The printer has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system.Request service. The system must remain powered off.

Waiting for laminator temp. This message does not display. The LCD displays the quot;Warming up xx%quot; message. The printer is waiting for the laminator heaters to reach operating temperature.

Emboss cover error. The embosser, printer, or multi-card hopper is open. Make sure that all access doors are closed securely and locked.

L2 heater roller problem. The laminator has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system.Request service. The system must remain powe...

Debow problem. The laminator has encountered an error in the debow area. Remove the card.Press the printer Power button to power off the system.Press the printer Power button again to power on the sys...

L2 heater sensor problem. The laminator has encountered a critical error. The card will be canceled. Press the printer Power button to power off the system.Request service. The system must remain powe...

Magstripe data not found. The printer did not find magnetic stripe data on card. 1. Make sure that you are using magnetic stripe cards that match the printer settings. 2. Make sure that the cards are ...

Multi-hopper error. The multi-hopper has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power o...