Impresser lost card. The card cannot be located in the impresser. Power off and unplug the printer and impresser.Open the impresser and remove the supply cassette.Remove the impresser from the printer...

Printer LCD message: Lost card, open emboss cover Driver message: Card not in position in embosser. The card is not correctly positioned in the embosser. 1. Open the embosser and remove the supply car...

Embosser card stack full. The embosser output hopper is full or blocked. Remove cards from the printer output hopper.

Emboss format error. The emboss data sent does not match the format set in the embosser. The card will be canceled.

Emboss critical error. The embosser has encountered a critical error. The card will be canceled. 1. Press the printer Power button to power off the system. 2. Request service. The system must remain p...

Topping foil support err. The embosser cannot use the topping foil installed. The card will be canceled. Use supplies designed for this printer.

Close emboss cover. The embosser, printer, or multi-card hopper is open. Make sure that all access doors are closed securely and locked.

Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: 1. Set up the external card reader to receive the card. 2. Perform error...

Laminator not available. The printer and laminator cannot communicate. The card will be canceled. 1. Make sure the data cable from the laminator to the printer is securely plugged in. 2. Press the pri...

Laminator not available. The printer and laminator cannot communicate. The card will be canceled. 1. Make sure the data cable from the laminator to the printer is securely plugged in. 2. Press the pri...