Skip to main content

Printer Manager D3.18.1 Printer Setting - Print Tab (1 - 39)

Printer Manager D3.18.1 Printer Setting - Print Tab (1 - 39)

Summary


DESCRIPTION DEFAULT SDO Notes
1) CableCompMaxStrobe 25 Even out print density where areas of strong contrast come together. Increase to increase density in most areas. Decrease to reduce unexpected lightness in smaller areas. Could help even out edges on color changes.
2) CardRegistration 0 Customer setting. Distance in millimeters (1mm is 0.0394 inch) to move the card after the sensor event before printing. The printer registers the card on the trailing edge. Increase to get the cards under the head if cutting ribbons before printing or on subsequent panels when the cut is clean like a scissors. This is because the edge of the card is one half of the scissors and the head is the other.
3) CardRegistrationCalibration 1.905 Setting. Distance in millimeters (1mm is 0.0394 inch) to move the card after the sensor event before printing. The printer registers the card on the trailing edge.
4) ColorAdjustB[0] 0 Blue table adjustment values applied to both 98mm and 101mm.
5) ColorAdjustB[1] 0 Blue table adjustment values applied to both 98mm and 101mm.
6) ColorAdjustB[2] 0 Blue table adjustment values applied to both 98mm and 101mm.
7) ColorAdjustB[3] 0 Blue table adjustment values applied to both 98mm and 101mm.
8) ColorAdjustB[4] 0 Blue table adjustment values applied to both 98mm and 101mm.
9) ColorAdjustB[5] 0 Blue table adjustment values applied to both 98mm and 101mm.
10) ColorAdjustB[6] 0 Blue table adjustment values applied to both 98mm and 101mm.
11) ColorAdjustB[7] 0 Blue table adjustment values applied to both 98mm and 101mm.
12) ColorAdjustB[8] 0 Blue table adjustment values applied to both 98mm and 101mm.
13) ColorAdjustB[9] 0 Blue table adjustment values applied to both 98mm and 101mm.
14) ColorAdjustB[10] 0 Blue table adjustment values applied to both 98mm and 101mm.
15) ColorAdjustG[0] 0 Green table adjustment values applied to both 98mm and 101mm.
16) ColorAdjustG[1] 0 Green table adjustment values applied to both 98mm and 101mm.
17) ColorAdjustG[2] 0 Green table adjustment values applied to both 98mm and 101mm.
18) ColorAdjustG[3] 0 Green table adjustment values applied to both 98mm and 101mm.
19) ColorAdjustG[4] 0 Green table adjustment values applied to both 98mm and 101mm.
20) ColorAdjustG[5] 0 Green table adjustment values applied to both 98mm and 101mm.
21) ColorAdjustG[6] 0 Green table adjustment values applied to both 98mm and 101mm.
22) ColorAdjustG[7] 0 Green table adjustment values applied to both 98mm and 101mm.
23) ColorAdjustG[8] 0 Green table adjustment values applied to both 98mm and 101mm.
24) ColorAdjustG[9] 0 Green table adjustment values applied to both 98mm and 101mm.
25) ColorAdjustG[10] 0 Green table adjustment values applied to both 98mm and 101mm.
26) ColorAdjustR[0] 0 Red table adjustment values applied to both 98mm and 101mm
27) ColorAdjustR[1] 0 Red table adjustment values applied to both 98mm and 101mm
28) ColorAdjustR[2] 0 Red table adjustment values applied to both 98mm and 101mm
29) ColorAdjustR[3] 0 Red table adjustment values applied to both 98mm and 101mm
30) ColorAdjustR[4] 0 Red table adjustment values applied to both 98mm and 101mm
31) ColorAdjustR[5] 0 Red table adjustment values applied to both 98mm and 101mm
32) ColorAdjustR[6] 0 Red table adjustment values applied to both 98mm and 101mm
33) ColorAdjustR[7] 0 Red table adjustment values applied to both 98mm and 101mm
34) ColorAdjustR[8] 0 Red table adjustment values applied to both 98mm and 101mm
35) ColorAdjustR[9] 0 Red table adjustment values applied to both 98mm and 101mm
36) ColorAdjustR[10] 0 Red table adjustment values applied to both 98mm and 101mm
37) ColorManagement sRGBColorSpace Use color management in the printer. Choose the type of color management or none. Options: None, sRGBColorSpace, Match SP
38) FanTempOn 45 The printhead temperature in degrees C at which to operate the fan. The fan goes on when the temperature is at or above this level. The fan turns off when temperature drops 2 degrees below this value. Lower this to help with wrinkling - starts cooling the head earlier.
39) FPower 0 Customer setting. Modify the intensity of printing for the F ribbon panel: Increase to make printed fluorescent thicker or more uniform, decrease to prevent ribbon breaks while printing fluorescent.