| Entrust

Error Code 103 - CD800, CD800 CLM, CD820

Summary

Printer problem

Summary

Magstripe format problem

Error Message no.	122
Message text	Magstripe format problem
Severity	Critical
Recovery Text	The magnetic stripe data sent does not match the format set in the printer. The card will be canceled.

Summary

Print ribbon problem

Error Message no.	109
Message text	Print ribbon problem
Severity	Error
Recovery Text	The print ribbon is not moving properly. Open the printer and remove the ribbon cartridge. Reposition, repair, or replace the ribbon and advance the repaired area one full turn. Replace the ribbon cartridge and close the printer.

Summary

Magstripe read data error

Error Message no.	107
Message text	Magstripe read data error
Severity	Critical
Recovery Text	The printer failed to read the magnetic stripe data from the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer settings. 2. Make sure that the cards are placed in the printer correctly.

Summary

Card not picked

Error Message no.	111
Message text	Card not picked
Severity	Warning
Recovery Text	The printer did not pick a card. To complete the current card: For printers with an input hopper, open the input hopper, add or reposition cards, and close the hopper. For printers with single card feed, push the card in until the printer picks it.

Summary

Print ribbon problem

Summary

Magstripe read no data

Summary

Magstripe data error

Error Message no.	105
Message text	Magstripe data error
Severity	Error
Recovery Text	The printer failed to verify that the correct magnetic stripe data was written on the card. Make sure that you are using magnetic stripe cards that match the printer settings. Make sure that the cards are placed in the printer correctly.

Summary

Magstripe read data error

Summary

Card not in position

Error Message no.	102
Message text	Card not in position
Severity	Critical
Recovery Text	The card is not positioned in the printer correctly. 1. Open the printer and remove the ribbon cartridge. 2. Turn the knob to remove the card. 3. Replace the ribbon cartridge and close the printer.