Laser cover open. The laser access door was opened during a job. Close and lock the laser access door.

Laser not available. A communication error occurred between the printer and the laser. 1. Press the printer Power button to power off the printer. 2. Press the Power button again to power on the print...

Laser template error. There is an error in the ConCAD or image generator template. The laser image data position (also called the turret Z-plane) is out of range. The card will be canceled. Modify the...

Input Hopper Jam exception. A card is in the exception slide during a hopper reset. Remove the card from the exception slide. This may or may not require the security enclosure door to be opened.

Input Hopper Jam exception. A card is in the exception slide during a hopper reset. Remove the card from the exception slide. This may or may not require the security enclosure door to be opened.

Input Hopper Jam card at exit. A card is at the hopper exit during hopper reset. Remove the card.

Input Hopper Jam print input. A card is already at the entrance of the print unit when another card is to be picked. Remove the card.

Input Hopper Jam at exit. A card remained at the multi-hopper exit and did not reach the print unit. OR After a card jam, the card was cleared by pushing it out of the multi-hopper to be deposited in ...

Input Hopper Jam print input. A card is already at the entrance of the print unit. Remove the card.

Input Hopper Jam card at exit. A card is already at the hopper exit when a new card was to be picked. Remove the card.