Summary
Insert new card side 2 up
| Error Message no. | 152 |
| Message text | Insert new card side 2 up |
| Severity | Warning |
| Recovery Text | 1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printer's User button or click OK. |
Summary
Input Hopper Jam exception
| Error Message no. | 190 |
| Message text | Input Hopper Jam exception |
| Recovery Text | A card is in the exception slide during a hopper reset. Remove the card from the exception slide. This may or may not require the security enclosure door to be opened. |
Summary
Laminator entry card problem
Summary
Print ribbon not supported
| Error Message no. | 119 |
| Message text | Print ribbon not supported |
| Severity | Critical |
| Recovery Text | The printer cannot use the ribbon installed. The card will be canceled. |
Summary
Wait for print temperature
| Error Message no. | 115 |
| Message text | Wait for print temperature |
| Recovery Text | This message does not display. The LCD displays the "Warming up xx%" message. The printer is waiting for the printhead heater to reach operating temperature. |
Summary
Print while unlocked
Summary
Emboss cover error
| Error Message no. | 142 |
| Message text | Emboss cover error |
| Severity | Error |
| Recovery Text | The embosser, printer, or multi-card hopper is open. Make sure that all access doors are closed securely and locked. |
Summary
Magstripe not available
Summary
Print ribbon not identified
| Error Message no. | 121 |
| Message text | Print ribbon not identified |
| Severity | Critical |
| Recovery Text | The printer cannot use the ribbon installed. The card will be canceled. Use ribbon designed for this printer. |
Summary
Card jammed in Stacker or Reject area.
