| Entrust

Error Code 179 - EZ ID System

Summary

Card not received

Error Message no.	179
Message text	Card not received
Severity	Error
Recovery Text	The card was not moved out of the external card reader. Remove the card from the external card reader.

Summary

Failed to lock

Error Message no.	151
Message text	Failed to lock
Severity	Critical
Recovery Text	An attempt to lock the printer failed. The card will be canceled. 1. Make sure that all access doors are closed securely. 2. Try locking the printer again.

Summary

Insert same card side 1 up

Error Message no.	171
Message text	Insert same card side 1 up
Severity	Warning
Recovery Text	Take the card from the printer and turn it over end to end so side 1 is facing up. Insert the card in the printer. If the card is not immediately picked, press the printer's User button or click OK.

Summary

Failed to lock

Summary

Move retransfer film one panel

Error Message no.	169
Message text	Move retransfer film one panel
Severity	Error
Recovery Text

Summary

Improper shutdown

Error Message no.	173
Message text	Improper shutdown
Severity	Critical
Recovery Text	The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer. Click OK on the PC to clear the message.

Summary

L2 area card problem

Summary

Improper shutdown

Error Message no.	173
Message text	Improper shutdown
Severity	Critical
Recovery Text	The printer was not shut down properly. 1.Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer. 2.Click OK on the PC to clear the message.

Summary

Insert new card side 2 up

Error Message no.	152
Message text	Insert new card side 2 up
Severity	Warning
Recovery Text	1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printer's User button or click OK.

Summary

Laminator not available