Card not picked. The printer did not pick a card. To complete the current card: For printers with an input hopper, open the input hopper, add or reposition cards, and close the hopper. For printers wi...
Wait for print temperature. This message does not display. The LCD displays the quot;Warming up xx%quot; message. The printer is waiting for the printhead heater to reach operating temperature.
Close cover to continue. The cover is open or the print ribbon cartridge is missing. Confirm that the print ribbon cartridge is installed and then close the cover.
Magstripe read no data. The printer did not find any magnetic stripe data on the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer settings....
Print ribbon problem. The print ribbon is not moving properly. 1. Open the printer and remove the ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repaired area one full ...
Failed to lock. An attempt to lock the printer failed. The card will be canceled. 1. Make sure that all access doors are closed securely. 2. Try locking the printer again.
Critical problem. The printer had a serious error. The card will be canceled. 1. Press the printer Power button to power off the printer. 2. Request service. The system must remain powered off.
K2 transport card jam. The card did not reach the required position on the K2 vertical transport. The card will be canceled. 1. Press the User button to move the card into the reject tray and clear th...
