Magstripe read data error. The printer failed to read the magnetic stripe data from the card. The card will be canceled. 1. Make sure that you are using magnetic stripe cards that match the printer se...
Magstripe data not found. The printer did not find magnetic stripe data on card. Make sure that you are using magnetic stripe cards that match the printer settings.Make sure that the cards are placed ...
Magstripe data error. The printer failed to verify that the correct magnetic stripe data was written on the card. Make sure that you are using magnetic stripe cards that match the printer settings.Mak...
Critical problem. The printer had a serious error. The card will be canceled. Press the printer Power button to power off the printer.Request service. The system must remain powered off.
Printer problem. The printer had an error. The card will be canceled. Press the printer Power button to power off the printer.Press the Power button again to power on the printer.
Card not in position. The card is not positioned in the printer correctly. Open the printer and remove the ribbon cartridge.Turn the knob to remove the card.Replace the ribbon cartridge and close the ...
Request not supported. The printer does not support the personalization being requested for the card. The card will be canceled. Change the card data to match the printers options and settings. Or Pri...
Laser horizontal data error. There is an error in the ConCAD or image generator template. The laser horizontal tilt position is out of range. The card will be canceled. Modify the template setup to ma...
