Card blocking exit sensors. A card is blocking the Kiosk exit sensors. If an external card reader is connected to the embosser: 1. Set up the external card reader to receive the card. 2. Perform error...
Improper shutdown. The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer.Click OK on the PC to clear ...
Insert same card side 2 up. 1. Take the card from the printer. 2. Turn the card over end to end so side 2 is facing up. 3. Insert the card in the printer. 4. If the card is not immediately picked, pre...
Close cover to continue. The cover is open or the print ribbon cartridge is missing. Confirm that the print ribbon cartridge is installed and then close the cover.
Card not picked. The printer did not pick a card. To complete the current card: For printers with an input hopper Open the input hopper.Add or reposition cards. Close the hopper. For printers with sin...
Print ribbon out or missing. The printer does not have usable ribbon. To complete the current card: 1. Open the printer and remove the ribbon cartridge. 2. Install a new ribbon and cleaning roller. 3....
Print ribbon problem. The print ribbon is not moving properly. 1. Open the printer and remove the ribbon cartridge. 2. Reposition, repair, or replace the ribbon and advance the repaired area one full ...
