Hardware Knowledge Base

Start your search by choosing your product and article type:

Technotes
Bulletins
Discontinuation Notices
Error Codes

Printer Manager D3.18.1 Printer Setting - Print Tab (1 - 39)

 
DESCRIPTIONDEFAULTSDO Notes
   
1) CableCompMaxStrobe25Even out print density where areas of strong contrast come together. Increase to increase density in most areas. Decrease to reduce unexpected lightness in smaller areas. Could help even out edges on color changes.
2) CardRegistration0Customer setting. Distance in millimeters (1mm is 0.0394 inch) to move the card after the sensor event before printing. The printer registers the card on the trailing edge. Increase to get the cards under the head if cutting ribbons before printing or on subsequent panels when the cut is clean like a scissors. This is because the edge of the card is one half of the scissors and the head is the other.
3) CardRegistrationCalibration1.905Setting. Distance in millimeters (1mm is 0.0394 inch) to move the card after the sensor event before printing. The printer registers the card on the trailing edge.
4) ColorAdjustB[0]0Blue table adjustment values applied to both 98mm and 101mm.
5) ColorAdjustB[1]0Blue table adjustment values applied to both 98mm and 101mm.
6) ColorAdjustB[2]0Blue table adjustment values applied to both 98mm and 101mm.
7) ColorAdjustB[3]0Blue table adjustment values applied to both 98mm and 101mm.
8) ColorAdjustB[4]0Blue table adjustment values applied to both 98mm and 101mm.
9) ColorAdjustB[5]0Blue table adjustment values applied to both 98mm and 101mm.
10) ColorAdjustB[6]0Blue table adjustment values applied to both 98mm and 101mm.
11) ColorAdjustB[7]0Blue table adjustment values applied to both 98mm and 101mm.
12) ColorAdjustB[8]0Blue table adjustment values applied to both 98mm and 101mm.
13) ColorAdjustB[9]0Blue table adjustment values applied to both 98mm and 101mm.
14) ColorAdjustB[10]0Blue table adjustment values applied to both 98mm and 101mm.
15) ColorAdjustG[0]0Green table adjustment values applied to both 98mm and 101mm.
16) ColorAdjustG[1]0Green table adjustment values applied to both 98mm and 101mm.
17) ColorAdjustG[2]0Green table adjustment values applied to both 98mm and 101mm.
18) ColorAdjustG[3]0Green table adjustment values applied to both 98mm and 101mm.
19) ColorAdjustG[4]0Green table adjustment values applied to both 98mm and 101mm.
20) ColorAdjustG[5]0Green table adjustment values applied to both 98mm and 101mm.
21) ColorAdjustG[6]0Green table adjustment values applied to both 98mm and 101mm.
22) ColorAdjustG[7]0Green table adjustment values applied to both 98mm and 101mm.
23) ColorAdjustG[8]0Green table adjustment values applied to both 98mm and 101mm.
24) ColorAdjustG[9]0Green table adjustment values applied to both 98mm and 101mm.
25) ColorAdjustG[10]0Green table adjustment values applied to both 98mm and 101mm.
26) ColorAdjustR[0]0Red table adjustment values applied to both 98mm and 101mm
27) ColorAdjustR[1]0Red table adjustment values applied to both 98mm and 101mm
28) ColorAdjustR[2]0Red table adjustment values applied to both 98mm and 101mm
29) ColorAdjustR[3]0Red table adjustment values applied to both 98mm and 101mm
30) ColorAdjustR[4]0Red table adjustment values applied to both 98mm and 101mm
31) ColorAdjustR[5]0Red table adjustment values applied to both 98mm and 101mm
32) ColorAdjustR[6]0Red table adjustment values applied to both 98mm and 101mm
33) ColorAdjustR[7]0Red table adjustment values applied to both 98mm and 101mm
34) ColorAdjustR[8]0Red table adjustment values applied to both 98mm and 101mm
35) ColorAdjustR[9]0Red table adjustment values applied to both 98mm and 101mm
36) ColorAdjustR[10]0Red table adjustment values applied to both 98mm and 101mm
37) ColorManagementsRGBColorSpaceUse color management in the printer. Choose the type of color management or none. Options: None, sRGBColorSpace, Match SP
38) FanTempOn45The printhead temperature in degrees C at which to operate the fan. The fan goes on when the temperature is at or above this level. The fan turns off when temperature drops 2 degrees below this value. Lower this to help with wrinkling - starts cooling the head earlier.
39) FPower0Customer setting. Modify the intensity of printing for the F ribbon panel: Increase to make printed fluorescent thicker or more uniform, decrease to prevent ribbon breaks while printing fluorescent.
*