Summary
Set print unit to download
| Error Message no. | 160 |
| Message text | Set print unit to download |
| Severity | Error |
| Recovery Text | The printer firmware is being updated. Refer to the Print Unit Front Panel section in the printer's User's Guide for information about how to set the printer to accept the firmware. |
Summary
Card blocking exit sensors
Summary
L1 area card problem
Summary
Card still in printer
| Error Message no. | 174 |
| Message text | Card still in printer |
| Recovery Text | RESERVED |
Summary
Laminator exit card problem
Summary
C2 supply not identified
| Error Message no. | 167 |
| Message text | C2 supply not identified |
| Severity | Error |
| Recovery Text | The printer cannot use the C2 retransfer film installed. The card will be canceled. Use a supply designed for this printer. |
Summary
L1 supply not supported
| Error Message no. | 204 |
| Message text | L1 supply not supported |
| Severity | Error |
| Recovery Text | The laminator cannot use the supply installed. Use supplies designed for this laminator. |
Summary
L1 supply problem
Summary
Input Hopper jam card lost
| Error Message no. | 194 |
| Message text | Input Hopper jam card lost |
| Recovery Text | A card either was not picked or was dropped before it reached the multi-hopper exit during a reject operation. Remove the card. |
Summary
Input Hopper Jam exception
| Error Message no. | 192 |
| Message text | Input Hopper Jam exception |
| Recovery Text | A card is in the exception slide during a hopper reset. Remove the card from the exception slide. This may or may not require the security enclosure door to be opened. |
