Summary
Failed to lock
| Error Message no. | 151 |
| Message text | Failed to lock |
| Severity | Critical |
| Recovery Text | An attempt to lock the printer failed. The card will be canceled. 1. Make sure that all access doors are closed securely. 2. Try locking the printer again. |
Summary
Insert same card side 1 up
| Error Message no. | 171 |
| Message text | Insert same card side 1 up |
| Severity | Warning |
| Recovery Text |
|
Summary
Failed to lock
Summary
Move retransfer film one panel
| Error Message no. | 169 |
| Message text | Move retransfer film one panel |
| Severity | Error |
| Recovery Text |
Summary
Improper shutdown
| Error Message no. | 173 |
| Message text | Improper shutdown |
| Severity | Critical |
| Recovery Text | The printer was not shut down properly. Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer. Click OK on the PC to clear the message. |
Summary
L2 area card problem
Summary
Improper shutdown
| Error Message no. | 173 |
| Message text | Improper shutdown |
| Severity | Critical |
| Recovery Text | The printer was not shut down properly. 1.Press and hold the User button to set the printer to Ready. Always use the Power button to power off the printer. 2.Click OK on the PC to clear the message. |
Summary
Insert new card side 2 up
| Error Message no. | 152 |
| Message text | Insert new card side 2 up |
| Severity | Warning |
| Recovery Text | 1. Turn a new card over end to end so side 2 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the printer's User button or click OK. |
Summary
Laminator not available
Summary
C2 supply type error
| Error Message no. | 176 |
| Message text | C2 supply type error |
| Severity | Error |
| Recovery Text | The C1 ink ribbon and C2 retransfer film are not compatible. Replace one or both with known compatible supplies. |
