Insert same card side 1 up. 1. Take the card from the printer and turn it over end to end so side 1 is facing up. 2. Insert the card in the printer. 3. If the card is not immediately picked, press the...
Laminator entry card problem. The card is not where it should be in the laminator. 1. Open the laminator. 2. Turn the knob to remove the card. 3. Close the laminator.
L2 area card problem. The card is not where it should be in the laminator. 1. Open the laminator and remove the L2 supply cartridge. 2. Turn the knob to remove the card. 3. Replace the supply cartridg...
Laminator system mismatch. The printer and laminator are not compatible. The laminator is not supported by your printer model. Contact your service provider for the correct laminator model.
Configuration error. The configuration is not compatible with the printer model. The printer cannot print cards until the configuration issue is corrected. Contact your service provider for assistance...
Critical problem. The printer had a serious error. The card will be canceled. Press the printer Power button to power off the printer. The system must remain powered off.Request service.
Firmware version mismatch. The printer and attached component firmware versions are not compatible. The system cannot process cards until the firmware has been updated. Update both the printer and com...
Retransfer debow error. The printer has encountered an error in the retransfer debow area. The card will be canceled. Press the User button to move the card into the reject tray and clear the error.If...
C1 supply out or missing. The C1 ink ribbon is missing or out of material. Open the printer access door and remove the C1 ink ribbon cartridge.Replace the ink ribbon.Replace the ink ribbon cartridge.C...