Debow problem. The laminator has encountered an error in the debow area. 1. Remove the card. 2. Press the printer Power button to power off the system. 3. Press the printer Power button again to power...

Impresser card jam. The card is not in position in the impresser. 1. Open the impresser door. 2. Remove the supply cartridge. 3. Push the card through the card track and out the impresser back exit sl...

Waiting for impresser temp. This message does not display. The LCD displays the message quot;Warming up xx%quot; (quot;Cooling down xx%quot; ???) The impresser is waiting for the impresser heater to r...

Impress foil not supported. The impresser cannot use the installed foil. Use a supply designed for this impresser.

Impresser door open. The impresser door is open. Close the door to continue.

Impresser error. An unexpected error has occurred in the impresser. Power down and restart the printer. If the error occurs again, request service.

Rewrite config mismatch. The rewritable card settings in the driver and Printer Manager do not match. The card will be canceled. Make sure that the following settings do not conflict: gt; Printing Pre...

Impresser lock error. RESERVED The impresser does not have locks. Reserved in case locks can be added in the future.

Supply region not valid. The printer cannot use the supply installed. The card will be canceled. Use a supply with the correct code for your region.

Impresser supply error Possible new LCD text: Impresser supply tag error OR Impresser tag update error. The supply tag was not updated properly. Power down and restart the printer. If the error occurs...